Solenoid Valve

The high pressure solenoid valve is a two-way type with one inlet and one outlet. It is a packless, internal pilot operated valve, suitable for use in releasing water pressure from the priming chamber of Viking Model E and F Series Deluge Valves and Viking Model H and J Series Flow Control Valves. The solenoid valve has floating diaphragm construction, which requires a minimum pressure drop across the valve to operate properly. The valves are available with a voltage rating of 24V DC in a normally closed or normally open confi guration. These solenoid valves are for use with system control units that are listed and/or approved for releasing service for water based fi re protection systems.

Features

+ Normally Closed or Normally Open

+ 24 VDC

+ Easy to clean.

+ Body Style: Straight through

+ NEMA 1 through 9.

+ Required Accessories: A 50 mesh strainer must be installed on the inlet side of the valve at the priming line connection. This strainer is included as part of the Model E or F Deluge Valve Trim and Model H or J Flow Control Valve Trim.