In-Line Eductor

Chemguard in-line eductors provide an inexpensive and effective method of metering all types of foam concentrate into a water stream.  Our brass, corrosion-resistant eductors enable variable metering at 0%, 0.5%, 1.0%, 3.0% and 6.0%.  The Chemguard in-line eductor system includes the metering valve and an 8-foot pickup-hose assembly.

Features

• Corrosion Resistant Brass Construction
• 1-1/2” swivel inlet X 1-1/2”male outlet
• Eductor rated for optimum flow at 200 PSI (14 Bar)
• Furnished with 30”(76cm) pick up tube
• Variable metering valve
• Removable metering valve
• A large, easy to read metering dial
• Ball check valve prevents back flow into foam concentrate

Operating Procedures

• Must be used with a nozzle of equivalent flow rate
• Maximum hose lay between eductor and nozzle on level ground using 1½"(3.8 cm) hose is 150 ft.(46m)
• Maximum hose lay between eductor and nozzle on level ground using 2"(5 cm) hose is 300 ft.(91m)
• Normal inlet operating pressure at eductor is 200 psi; however, the eductor can be used at lower inlet pressures with a  corresponding reduction in flow rates

* Pressure loss through the Chemguard eductor is approximately 35% of the inlet pressure

Suitable 

• Suitable for use with water,  AFFF, AR-AFFF, Fluoroprotein and Class “A” foam concentrates