Automatic heat detector with fast semiconductor sensor for the detection of fires with rapidly rising temperatures and integrated fixed temperature function for the detection of fires with slowly rising temperatures. Conventional detector without switch-on-control, with alarm latch and alarm indicator.
Detector series preferably for connection to third-party control panels
Detector series can be used with all ESSER fire alarm panels
All detectors without switch-on-control
Green marking on housing for heat detectors
Up to 30 detectors can be connected per zone
Rated voltage UN = 9 V
Low closed-circuit current
The detector alarm current can be programmed for the adaptation to other manufacturer’s panels
Large operating voltage range
Detector design based on SMD technology
All detectors can be programmed on one primary loop
Standard detector base Part No. 781590, detector base Part No. 781588 with relay output (30 V/1 A) or detector base Part No. 781592 with optocoupler output (30 V/0.4 A) can be used for all series 9000 detectors
Easy installation
Pre-mounting plate with snap-in adapter
Detector base with base adapter Part No. 781498 up to IP43
Optional detector lock
Detector removal tool for max. 9 m mounting height
Reverse polarity protected
Operating voltage 8... 28 V DC
Quiescent current @ 9 V DC approx. 12 μA
Alarm current @ 9 V DC typ.9 mA
Display redLED / light pipe
Area to be monitored max.30 m²
Height to be monitored max.7.5 m
Application temperature -20 °C ... 50 °C
Storage temperature -25°C ... 75 °C
Type of protection IP40,IP43 with base adapter 781498
Material ABS
Color white,similar to RAL 9010
Weight approx.90 g
Detector specification EN 54 - 5 A1
Dimensions Ø:90 mm H: 61 mm
Ø:90 mm H: 72 mm (incl. base)
767800 Mounting bracket
781590 Detector base for series 9000/9200
781588 Detector base with relay contact for series 9000